Product Details:
Euronorm | 1.4541 X6CrNiTi 18-10 |
Afnor | Z6 CNT 18-10 |
DIN | W1.4541 |
ASTM | A 240 - TP 321 UNS S32100 |
Grade | UNS No | Old British | Euronorm | Swedish SS | Japanese JIS | ||
BS | En | No | Name | ||||
321 | S32100 | 321S31 | 58B, 58C | 1.4541 | X6CrNiTi18-10 | 2337 | SUS 321 |
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | Other | |
321 | min. max | – 0.08 | 2 | 0.75 | 0.045 | 0.03 | 17.0 19.0 | – | 9.0 12.0 | 0.1 | Ti=5(C+N) 0.70 |
Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
Rockwell B (HR B) max | Brinell (HB) max | ||||
321 | 515 | 205 | 40 | 95 | 217 |
Product Details:
Application | Construction |
Material Grade | 309 & 309S |
Material | Steel |
Standard | ASME SA 240, ASME SA 312, ASME SA 479 |
Element | Content (%) |
Iron, Fe | 60 |
Chromium, Cr | 23 |
Nickel, Ni | 14 |
Manganese, Mn | 2 |
Silicon, Si | 1 |
Carbon, C | 0.2 |
Phosphorous, P | 0.045 |
Sulfur, S | 0.03 |
Properties | Metric | Imperial |
Density | 8 g/cm3 | 0.289 lb/in³ |
Melting point | 1455°C | 2650°F |
Properties | Metric | Imperial |
Tensile strength | 620 MPa | 89900 psi |
Yield strength (@ strain 0.200%) | 310 MPa | 45000 psi |
Izod impact | 120 – 165 J | 88.5 – 122 ft-lb |
Shear modulus (typical for steel) | 77 GPa | 11200 ksi |
Elastic modulus | 200 GPa | 29008 ksi |
Poisson’s ratio | 0.27-0.30 | 0.27-0.30 |
Elongation at break (in 50 mm) | 0.45 | 0.45 |
Hardness, Brinell | 147 | 147 |
Hardness, Rockwell B | 85 | 85 |
Hardness, Vickers (converted from Rockwell B hardness) | 169 | 169 |
Product Details:
Thickness | 1-200 mm |
Material Grade | SS316 |
Standard | ASTM, AISI, DIN |
Surface Treatment | Hot Rolled |
CR | Mang | Phos | Sulfur | Silicon | Chromium | Nickel | Nitogen | Balance Iron |
Max | Max | Max | Max | Max | Max | Max | Max | Max |
0.08 | 2 | 0.045 | 0.03 | 0.75 | 16-18 | 10–14 | 0.1 | - |
°C | °F | Minimum guaranteed values * | Typical values | El % | ||||||||||
Y.S. 0.2% | Y.S. 1% | UTS | Y.S. 0.2% | Y.S. 1% | UTS | |||||||||
MPa | Ksi | MPa | Ksi | MPa | Ksi | MPa | Ksi | MPa | Ksi | MPa | Ksi | |||
20 | 68 | 220 | 32 | 260 | 38 | 520/670 | 76/98 | 310 | 44 | 350 | 51 | 680 | 85 | 45 |
100 | 212 | 166 | 24 | 199 | 29 | 430 | 63 | 280 | 40 | 330 | 48 | 490 | 72 | 43 |
200 | 392 | 137 | 20 | 167 | 24 | 390 | 57 | 200 | 28 | 230 | 33 | 450 | 66 | 35 |
Product Details:
Thickness | 0.01~200mm |
Standard | ASTM A240,JIS4304-2005,ASTM A167,EN10088-2-2005,GB/T3280-2007, etc |
Width | 1000mm,1219mm,1500mm,1800mm,2000mm,2500mm,3000mm,3500mm,etc |
Length | 2000mm,2440mm,3000mm,5800mm,6000mm,etc |
Product Details:
Thickness | 0.01~200mm |
Standard | ASTM A240,JIS4304-2005,ASTM A167,EN10088-2-2005,GB/T3280-2007, etc |
Surface Treatment | 2B,2D,BA,NO.1,NO.4,NO.8,8K,mirror,checkered,embossed,hair line,sand blast,Brush,etching,etc |
Material | Stainless Steel |
CHROMIUM (Cr) | 17-19 |
NICKEL (N) | 43322 |
MAGANESE (Mn) | 2.00 max |
CARBON (C) | 0.15 max |
SULFUR (S) | 0.030 max |
PHOSPHORUS (P) | 0.045 max |
SILICON (Si) | 1.00 max |
Ultimate Tensile Strength psi | 100000 |
0.2% Offset Yield Strength psi | 100000 |
Percent Elongation in 2 inches | 50 |
Hardness Rockwell | B85 |
Product Details:
Standard | AISI, JIS, ASTM |
Surface Treatment | Cold Rolled, Hot Rolled |
Length | 2000mm,2440mm,3000mm,5800mm,6000mm,etc |
Width | 1000mm,1219mm,1500mm,1800mm,2000mm,2500mm,3000mm,3500mm,etc |
- | 304 |
Carbon, Max % | 0.07 |
Manganese, Max % | 2 |
Phosphorus, Max % | 0.045 |
Sulphur, Max % | 0.03 |
Silicon Max | 0.75 |
Chromium range | 17.5-19.5 |
Nickel range | 8.0-10.5 |
Nitrogen Max | 0.1 |
- | 304 |
Tensile Min | 75 ksi |
Yield Min | 30 ksi |
Elongation Min | 40.00% |
Hardness Max | 95 HRB |
Product Details:
Standard | DIN, JIS, ASTM, AISI |
Thickness | 0.01~200mm |
Surface Treatment | Coated, Hot Rolled |
Material Grade | SS304L |
Product Details:
Steel Grade | SS 304 |
Standard | AISI, DIN, JIS |
Thickness | 4-5 mm |
Surface Treatment | Hot Rolled |
Element | Type309S |
Carbon | 0.08 max. |
Manganese | 2.00 max. |
Sulfur | 0.030 max. |
Phosphorus | 0.045 max. |
Silicon | 0.75 max. |
Chromium | 22.0 – 24.0 |
Nickel | 12.0 – 15.0 |
Type | Yield Strength 0.2% offset (KSI) | Tensile Strength (KSI) | % Elongation (2″ Gauge length) | Hardness Rockwell |
309S | 30 min. | 75 min. | 40 min. | HRB 95 max. |
Density (lb./ in^2) @ RT | - | 0.29 |
Modulus of Elasticity in Tension (psi x 10^6) | - | 29 |
Specific Heat (BTU/o F/lb.) | 32 to 212 oF | 0.12 |
Thermal Conductivity (BTU/hr/ft^2/ft) | 212oF | 9 |
932oF | 10.8 | |
Mean Coefficient of Thermal Expansion (in. x 10^-6 per o F) | 32 to 212oF | 8.3 |
32 to 600oF | 9.3 | |
32 to 1,000oF | 9.6 | |
32 to 1,200oF | 10 | |
Electrical Resistivity (micro ohms – cm) | at 70oF | 39.8 |
Melting Point Range (oF) | - | 2550 – 2650 |
Oxidation Resistance – Continuous Service(oF) | - | 2000 |
Oxidation Resistance – Intermittent Service(oF) | - | 1800 |
Product Details:
Thickness | 0.03~200mm |
Standard | ASTM, JIS |
Surface Treatment | Hot Rolled |
Material | Stainless Steel |
Type# | UNS# | Chemical Composition(%) | |||||||
C max | Mn | P | S | Si | Cr | Ni | N,Mo | ||
310S | S31008 | 0.08 | 2 | 0.045 | 0.03 | 1.5 | 24-26 | 19-22 | — |
Type# | UNS# | Mechnical Property | ||||||
Tensile Strength | Yield Strength,Bmin | Elongation 2 in,or 50 mm,min,% | Hardness, maxc | |||||
Ksi | MPa | Ksi | MPa | Brinell | Rockwell B | |||
310S | S31008 | 75 | 515 | 30 | 205 | 40 | 217 | 95 |
Product Details:
Steel Grade | SS316 L |
Standard | JIS, ASTM, DIN |
Thickness | 0.05~200mm |
Surface Treatment | Hot Rolled |
Type# | UNS# | Chemical Composition(%) | |||||||
C max | Mn | P | S | Si | Cr | Ni | N,Mo | ||
310H | S31009 | 0.04-0.1 | 2 | 0.045 | 0.03 | 0.75 | 24-26 | 19-22 | — |
Type# | UNS# | Mechnical Property | ||||||
Tensile Strength | Yield Strength,Bmin | Elongation 2 in,or50 mm,min,% | Hardness, maxc | |||||
Ksi | MPa | Ksi | MPa | Brinell | Rockwell B | |||
310H | S31009 | 75 | 515 | 30 | 205 | 40 | 217 | 95 |
Product Details:
Steel Grade | SS321 |
Thickness | 0.08~200mm |
Standard | ASTM, AISI, JIS |
Material | Stainless Steel |
- | Cr | Ni | Mo | Cu | Ti | C |
MIN | 17 | 9 | – | – | 5x(C+N) | – |
MAX | 19 | 12 | 0.75 | 0.75 | 0.7 | 0.08 |
- | Mn | Si | P | S | N | Fe |
MIN | – | 0.25 | – | – | – | – |
MAX | 2 | 1 | 0.04 | 0.03 | 0.1 | Bal |
Temperature, °F | Ultimate Tensile Strength, ksi | .2% Yield Strength, ksi |
68 | 84 | 38 |
400 | 62 | 20.5 |
600 | 62 | 18 |
800 | 62 | 17 |
1000 | 59.5 | 16.5 |
1200 | 45.5 | 16 |
1400 | 27.5 | 14 |
Product Details:
Steel Grade | SS321H |
Thickness | 0.11~200mm |
Standard | AISI, DIN, JIS |
Material | Stainless Steel |
% | Cr | Ni | C | Si | Mn | P | S | N | Ti | Fe |
321H | min:17.0 max:19.0 | min: 9.0 max: 12.0 | min:0.04 max:0.10 | min:18.0 max:20.0 | max:2.0 | max: 0.045 | max: 0.03 | max:0.10 | min: 5* (C+N)max:0.70 | Balance |
Grade | Tensile Strengthksi (min.) | Yield Strength 0.2%Offset ksi (min.) | Elongation -% in50 mm (min.) | Hardness(Brinell) MAX |
321H | 75 | 30 | 40 | 217 |
Product Details:
Steel Grade | SS330 |
Material | Stainless Steel |
Thickness | 0.04~200mm |
Standard | ASTM, AISI, JIS |
Cr | Ni | Mn | Si | P | S | C | Fe |
17.0-20.0 | 34.0-37.0 | 2.0 Max | 0.75-1.50 | 0.03 Max | 0.03 Max | 0.08 Max | Balance |
Form and Condition | Ultimate Tensile Strength, ksi | .2% Yield Strength, ksi | Elongation % |
Plate, hot rolled and Annealed | 80-85 | 30-43 | 40-45 |
Sheet, cold rolled and Annealed | 80-90 | 32-42 | 35-45 |
Product Details:
Steel Grade | SS347 |
Material | Stainless Steel |
Length | 2000mm,2440mm,3000mm,5800mm,6000mm,etc |
Width | 1000mm,1219mm,1500mm,1800mm,2000mm,2500mm,3000mm,3500mm,etc |
UNS No | Grade | C | Si | Mn | P | S | Cr | Mo | Ni | N | Other |
S34700 | 347 | 0.08 | 0.75 | 2 | 0.045 | 0.03 | 17.00/19.00 | – | 9.00/13.00 | – | Cb:10xC1.00 |
UNS No | Grade | Proof Stress 0.2% (MPa) | Tensile Strength (MPa) | Elongation A5(%) | Hardness Max | |
HB | HRB | |||||
S34700 | 347 | 205 | 515 | 40 | 201 | 92 |
Product Details:
Steel Grade | SS347H |
Standard | ASTM, AISI, JIS |
Thickness | 0.10~200mm |
Material | Stainless Steel |
- | C | Cr | Mn | Ni | P | S | Si | Cb/Ta |
347H | min: 0.04 max: 0.10 | min: 17.0 max: 20.0 | 2.0 max | min: 9.0max: 13.0 | 0.03 max | 0.30max | 0.75max | min:10x C max: 1.0 |
Grade | Tensile Strength ksi (MPa) min | Yield Strength 0.2% ksi offset ksi (MPa) min | Elongation (% in 50mm) min | Hardness (Brinell) MAX | Hardness (Rockwell B) MAX |
347H | (515)75 | (205)30 | 40 | 201 | 95 |
Product Details:
Steel Grade | SS32750 |
Thickness | 0.15~200mm |
Standard | ASTM, AISI, JIS |
Material | Stainless Steel |
Cr | Ni | Mo | C | N | Mn |
24.0-26.0 | 6.0-8.0 | 3.0-5.0 | 0.030 Max | .24-.32 | 1.20 Max |
Si | Cu | P | S | Fe | - |
0.80 Max | 0.50 Max | 0.035 Max | 0.020 Max | Balance | - |
Ultimate Tensile Strength, ksi Minimum | .2% Yield Strength, ksi Minimum | % Elongation Min. | - |
116 | 80 | 15 | 310 |
Product Details:
Thickness | 0.05~200mm |
Steel Grade | SS317 |
Standard | ASTM, AISI, JIS |
Material | Stainless Steel |
Carbon | 0.08 |
Manganese | 2 |
Silicon | 0.75 |
Chromium | 18.00 20.00 |
Nickel | 11.00 15.00 |
Molybdenum | 3.00 4.00 |
Phosphorus | 0.045 |
Sulfur | 0.03 |
Nitrogen | 0.1 |
Iron | Bal. |
Grade | Tensile Strength ksi (min.) | Yield Strength 0.2% Offset ksi (min.) | Elongation – % in 50 mm (min.) | Hardness (Brinell) MAX | Hardness (Rockwell B) MAX |
317L | 75 | 30 | 40 | 217 | 95 |
Product Details:
Thickness | 2-3 mm |
Material | Steel |
Steel Grade | Abrazo 400 |
Brand | Manufacture/Co | Hardness Range | C.E.V. Typical Values |
Values for AR 400 | Thk: 10 – 20 | ||
HARDOX 400 | SSAB | 370-430 | 0.37 |
QUARD 400 | DUFERCO | 370-430 | 0.42 |
JFE EVERHARD 360LE | JFE STEEL CORPN. | 360-430 | 0.38 |
SUMIHARD K400 | SUMITOMO METALS | 400-440 | 0.46 |
ABRAZO 400 | TATA UK LTD. | 360-430 | 0.43 |
RAEX 400 | RUUKKI | 360-430 | 0.43 |
DILLIDUR 400V | DILLINGER HUTTE | 370-430 | 0.43 |
XAR 400 | THYSSEN KRUPP | 370-430 | 0.43 |
BRINAR 400 | ILSENBURGER GROBBLECH | 360-430 | 0.48 |
FORA 400 | INDUSTEEL | 360-430 | 0.48 |
HARDPLAST 380 | ISD HUTA | 360-430 | 0.56 |
NICRODUR 400 | ACRONI | 360-430 | 0.56 |
Product Details:
Thickness | 6mm-100mm |
Width | 1.25, 2.5, 2m, 2.5m |
Length | Up to 12m |
Chrome Moly Plate A 387/A 387M / 2001 | ||||||
Grade – 5 | Grade – 9 | Grade – 11 | Grade – 12 | Grade – 22 | Grade – 91 | |
Carbon : | ||||||
Heat analysis | 0.15 max | 0.15 max | 0.05-0.17 | 0.05-0.17 | 0.05-0.15A | 0.06-0.12 |
Product analysis | 0.15 max | 0.15 max | 0.04-0.17 | 0.04-0.17 | 0.04-0.15A | 0.06-0.15 |
Manganese : | ||||||
Heat analysis | 0.30-0.60 | 0.30-0.60 | 0.40-0.65 | 0.40-0.65 | 0.30-0.60 | 0.30-0.60 |
Product analysis | 0.25-0.66 | 0.25-0.66 | 0.35-0.73 | 0.35-0.73 | 0.25-0.66 | 0.25-0.66 |
Phosphorus, max : | ||||||
Heat analysis | 0.035 | 0.03 | 0.035 | 0.035 | 0.035 | 0.02 |
Product analysis | 0.035 | 0.03 | 0.035 | 0.035 | 0.035 | 0.025 |
Sulfur. Max : | ||||||
Heat analysis | 0.03 | 0.03 | 0.035 | 0.035 | 0.035 | 0.01 |
Product analysis | 0.03 | 0.03 | 0.035 | 0.035 | 0.035 | 0.012 |
Product Details:
Steel Grade | SS316L |
Standard | AISI, JIS, ASTM |
Material | Stainless Steel |
CR | Mang | Phos | Sulfur | Silicon | Chromium | Nickel | Nitogen | Balance Iron |
Max | Max | Max | Max | Max | Max | Max | Max | Max |
0.03 | 2 | 0.045 | 0.03 | 0.75 | 16-18 | 10–14 | 0.1 | - |
Grade | Tensile Strengthksi (min) | Yield Strength0.2% ksi (min) | Elongation % | Hardness (Brinell) MAX | Hardness(Rockwell B) MAX |
316L(S31603) | 70 | 25 | 40 | 217 | 95 |
nterval | Thermal | °C | °F | Resistivity | Thermal | Specific | Young | Shear |
temper | expansion | (µΩ cm) | conductivity | heat | modulus | modulus | ||
°C | αx10-6K-1 | - | (W.m-1.K-1) | (J.kg-1.K-1) | E | G | ||
- | - | - | - | - | (GPa) | (GPa) | ||
20-100 | 16 | 20 | 68 | 75 | 15 | 500 | 200 | 77 |
Product Details:
Application | Construction |
Material | Steel |
Thickness | 10-25 mm |
C | Si | Mn | Cr | Mo | Ni | N |
0.025 | 0.6 | 1.3 | 22.6 | 3.2 | 5.8 | 0.17 |
EN / DIN | ASTM | UNS | AFNOR |
<1.4462 > X2CrNiMoN22-5-3 | A240 | S31803 | Z2CND22-5 Az |
Product | Dimension Size mm | 0.2% proof stress N/mm2 min. | Tensile strength N/mm2 | Elongation A5 % min. L Q T | Impact strength (ISO-V) J min. L Q T |
St | ≤ 160 | 450 | 650 – 880 | 25 | 100 |
Bl | ≤ 75 | 460 | 640 – 840 | 252) 252) | 90 60 |
0.2% proof stress N/mm2 min. | Temperature | |||
100°C | 150°C | 200°C | 250°C | |
360 | 335 | 315 | 300 |
Product Details:
Application | Automobile Industry, Construction |
Material | Steel |
Thickness | 6.5 mm |
Cr | Ni | Mo | C | N |
22.0-23.0 | 4.50-6.50 | 3.00-3.50 | .030 Max | 0.14-0.20 |
Mn | Si | P | S | Fe |
2.00 Max | 1.00 Max | .030 Max | .020 Max | Balance |
Ultimate Tensile Strength, ksi Minimum | .2% Yield Strength, ksi Minimum | Hardness Max. |
95 | 65 | 31 Rockwell C |
Product Details:
Thickness | 0.01~200mm |
Width | 1000mm,1219mm,1500mm,1800mm,2000mm,2500mm,3000mm,3500mm,etc |
Length | 2000mm,2440mm,3000mm,5800mm,6000mm,etc |
Element | - | - |
Chromium | 17.0 min | 19.0 max |
Nickel | 8.0 min | 10.0 max |
Carbon | 0.15 | - |
Manganese | 2 | - |
Phosphorus | - | 0.20 max |
Sulfer | 0.15 min | 0.35 |
Silicon | - | 1.00 max |
Molybendum | - | 0.60 max |
- | ASTM A 895 | - |
Yield Strength .2% Offset | psi (min) 45,000 | (Mpa) 310 |
Ultimate Tensile Strength | Psi (min) 85,000 | (Mpa) 586 |
Elongation in 2 in. | % (min) 50 | - |
Hardness | - | (max) 202 (HBN) |
Density lb/inᶟ | 0.29 |
Density g/cmᶟ | 7.89 |
Melting Point | 2552°F |
Thermal Conductivity at 212°F (100°C) | 112 BTU/hr/ft²/ft/°F |
Thermal Conductivity at 212°F (100°C) | 16.2 W/m-°K |
Electrical Resistivity | 28.3 Microhm-in at 68°C |
Electrical Resistivity | 72.0 Microhm-cm at 20°C |
Product Details:
Thickness | 0.01~200mm |
Standard | ASTM A240,JIS4304-2005,ASTM A167,EN10088-2-2005,GB/T3280-2007, etc |
Width | 1000mm,1219mm,1500mm,1800mm,2000mm,2500mm,3000mm,3500mm,etc |
UNS NO | Grade | C | Si | Mn | P | S | Cr | Mo | Ni | N |
S30409 | 304H | 0.04/0.10 | 0.75 | 2 | 0.045 | 0.03 | 18.00/20.00 | – | 8.00/10.50 | 0.1 |
UNS No | Grade | Proof Stress 0.2% (MPa) | Tensile Strength (MPa) | Elongation A5(%) | Hardness Max | |
HB | HRB | |||||
S30409 | 304H | 205 | 515 | 40 | 201 | 92 |
Product Details:
Thickness | 0.01~200mm |
Width | 1000mm,1219mm,1500mm,1800mm |
Length | 2000mm,2440mm,3000mm |
Element | Type309 |
Carbon | 0.20 max. |
Manganese | 2.00 max. |
Sulfur | 0.030 max. |
Phosphorus | 0.045 max. |
Silicon | 0.75 max. |
Chromium | 22.0 – 24.0 |
Nickel | 12.0 – 15.0 |
Type | Yield Strength 0.2% offset (KSI) | Tensile Strength (KSI) | % Elongation (2″ Gauge length) | Hardness Rockwell |
309 | 30 min. | 75 min. | 40 min. | HRB 95 max. |
Density (lb./ in^2) @ RT | 0.29 | |
Modulus of Elasticity in Tension (psi x 10^6) | 29 | |
Specific Heat (BTU/o F/lb.) | 32 to 212 oF | 0.12 |
Thermal Conductivity (BTU/hr/ft^2/ft) | 212oF | 9 |
932oF | 10.8 | |
Mean Coefficient of Thermal Expansion (in. x 10^-6 per o F) | 32 to 212oF | 8.3 |
32 to 600oF | 9.3 | |
32 to 1,000oF | 9.6 | |
32 to 1,200oF | 10 | |
Electrical Resistivity (micro ohms – cm) | at 70oF | 39.8 |
Melting Point Range (oF) | - | 2550 – 2650 |
Oxidation Resistance – Continuous Service(oF) | - | 2000 |
Oxidation Resistance – Intermittent Service(oF) | - | 1800 |
Product Details:
Steel Grade | SS316H |
Material | Stainless Steel |
Length | 2000mm,2440mm,3000mm,5800mm,6000mm,etc |
STANDARD | UNS | WERKSTOFF NR. |
SS 316H | S31609 | – |
Grade | - | C | Mn | Si | P | S | Cr | Mo | Ni | N |
316H | Min | 0.04 | 0.04 | 0 | – | – | 16 | 2 | 10 | – |
max | 0.1 | 0.1 | 0.75 | 0.045 | 0.03 | 18 | 3 | 14 | – |
Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
Rockwell B (HR B) max | Brinell (HB) max | ||||
316H | 515 | 205 | 0.4 | 95 | 217 |
Grade | Density (kg/m3) | Elastic Modulus (GPa) | Mean Co-eff of Thermal Expansion (µm/m/°C) | Thermal Conductivity (W/m.K) | Specific Heat 0-100°C (J/kg.K) | Elec Resistivity (nΩ.m) | |||
0-100°C | 0-315°C | 0-538°C | At 100°C | At 500°C | |||||
316H | 8000 | 193 | 15.9 | 16.2 | 17.5 | 16.3 | 21.5 | 500 | 740 |
Product Details:
Steel Grade | SS317L |
Thickness | 0.07~200mm |
Material | Stainless Steel |
% | Cr | Ni | C | Si | Mn | P | S | Mo | Fe |
317L | min: 18.0max:20.0 | min: 11.0max: 15.0 | 0.035max | 0.75max | 2.0max | 0.04max | 0.03max | min: 3max: 4 | balance |
Grade | Tensile Strengthksi (min.) | Yield Strength 0.2%Offset ksi (min.) | Elongation -% in 50 mm (min.) | Hardness(Brinell) MAX | Hardness(Rockwell B) MAX |
317L | 75 | 30 | 40 | 217 | 95 |
Product Details:
Thickness | 0.07~200mm |
Standard | ASTM, AISI, JIS |
Material | Stainless Steel |
C | Cr | Cu | Mn | Mo | Ni | P | S | Si |
Max | Max | Max | Max | Max | ||||
0.02 | 19.0-23.0 | 1.0-2.0 | 2 | 4.0-5.0 | 23.0-28.0 | 0.045 | 0.035 | 1 |
Condition | Test Specimen Annealed |
Temper | 70 |
Tensile Strength | 87 |
Yield Strength | 40 |
Elongation | 50 |
Reduction of Area | 55 |
Rockwell | B79 |
Temp °C | Density Kg/m³ | Mean Coefficient of Thermal Expansion | Modulus of Elasticity kg/mm | Electrical Resistivity Ωmm²/m | Specific Heat J/kg ºC |
20 | 8 | 16.1×10-6 | 19500 | 0.85 | 500 |
Product Details:
Standard | ASTM A240,JIS4304-2005,ASTM A167,EN10088-2-2005 |
Thickness | 0.12-200 mm |
Material | Stainless Steel |
- | C | Mn | Si | P | S | Cr | Mo | Ni | N |
2205(S31803) | 0.03max | 2.0max | 1.0max | 0.03max | 0.02max | min: 21.0max: 23.0 | min: 2.5max: 3.5 | min: 4.5max: 6.5 | min: 0.08max: 0.20 |
2205(S32205) | 0.03max | 2.0max | 1.0max | 0.03max | 0.02max | min: 22.0max: 23.0 | min: 3.0max: 3.5 | min: 4.5max: 6.5 | min: 0.14max: 0.20 |
Grade | Tensile Strengthksi (min) | Yield Strength0.2% ksi (min) | Elongation % | Hardness (HB) MAX |
2205 | 90 | 65 | 25 | 217 |
Product Details:
Thickness | 0.13-200 mm |
Material | Stainless Steel |
Technique | Hot rolled |
C | Mn | P | S | Si | Cr | Ni | Mo | N |
0.03 | 1 | 0.03 | 0.01 | 1 | 24.0-26.0 | 6.0-8.0 | 3.0-4.0 | 0.20-0.30 |
Tensile | Yield | Elongation | Hardness |
MPa min | MPa min | % min | Brinell max |
750 | 550 | 25 | 270 |
Product Details:
Steel Grade | SS 409L |
Thickness | 1-2 mm |
Shape | Rectangular |
Product Details:
Thickness | 3-4 mm |
Standard | DIN17155 15Mo3 and UNI5869 15M03, 15D3 (NFA 36205 ) and ASTM A204Gr.B. |
Material | Steel |
16M03 EN 10028-2 Number:1.5415 | Comparision of steel grades | |
DIN 17155 | 15 Mo03 | |
NFA 36-205 | 15 D3 | |
UNI 5869 | 15 M0 3 | |
BS 1501 | 1503 – 243 B | |
UNE 36087 | 16 Mo 3 | |
ASTM | A 204 Gr. B | |
JIS G3115 | – |
C | Si | Mn | Ni | P | S | Cr | Mo | N | Cu |
0.12 – 0.2 | max 0.35 | 0.4 – 0.9 | max 0.3 | max 0.025 | max 0.01 | max 0.3 | 0.25 – 0.35 | max 0.012 | max 0.3 |
Nominal thickness (mm): | to 16 | 16 – 40 | 40 – 60 | 60 – 100 | 100 – 150 | 150 – 250 |
ReH – Minimum yield strength (MPa) (+N) | 275 | 270 | 260 | 240 | 220 | 210 |
A – Min. elongation at fracture (%) longitud., (+QT) | 23 | – | – | – |
A – Min. elongation at fracture (%) transverse, (+N) | 20 | – | – | – |
Nominal thickness (mm): | to 40 | 40 – 60 | 60 – 100 | 100 – 150 |
A – Min. elongation at fracture (%) (+N) | 24 | 23 | 22 | 19 |
Product Details:
Thickness | 12.5 mm and under |
Silicon | 0.15 - 0.40 |
Tensile Strength MPa | 485 - 620 (70 - 90) |
Element | Thickness | Composition (%) | Note |
Carbon (max) | 12.5 mm and under | 0.27 | A, B, C |
over 12.5 to 50 mm | 0.28 | A, B, C | |
over 50 to 100 mm | 0.3 | A, B, C | |
over 100 mm | 0.31 | A, B, C | |
Manganese | 0.85 – 1.20 | A, C | |
0.79 – 1.30 | B, C | ||
Phosphorus (max) | 0.025 | A, B | |
Sulphur (max) | 0.025 | A, B | |
Silicon | 0.15 – 0.40 | A | |
0.13 – 0.45 | B |
Mechanical Property | Value |
Tensile Strength, MPa (ksi) | 485 – 620 (70 – 90) |
Yield Strength, min MPa (ksi) | 260 (38) |
Elongation min, % 200 mm (8 in) | 17 |
Elongation min, % 50 mm (2 in) | 21 |
Product Details:
Material | Stainless Steel |
Grade | 409 |
Surface Treatment | Cold Rolled |
Product Details:
Material Grade | 409M |
Thickness (Millimeter) | 2-3 mm |
Product Details:
Material Grade | 410 |
Shape | Rectangle |
Material | Stainless Steel |
Product Details:
Euronorm | 1.4550 X6CrNiNb18-10 |
Afnor | Z6 CN Nb 18-10 |
DIN | WW1.4550 |
ASTM | A 240 - TP 347 |
Grade | UNS No | Old British | Euronorm | Swedish SS | Japanese JIS | ||
BS | En | No | Name | ||||
347 | S34700 | 347S31 | 58G | 1.455 | X6CrNiNb18-10 | 2338 | SUS 347 |
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | Other | |
347 | min/max | 0.08 | 2 | 0.75 | 0.045 | 0.03 | 17.0 19.0 | – | 9.0 13.0 | – | Nb=10(C+N) 1.0 |
Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
Rockwell B (HR B) max | Brinell (HB) max | ||||
347 | 515 | 205 | 40 | 92 | 201 |
°C (°F) | -196 (-320) | +20 (68) |
KCV (J/cm2) Typical | 175 | 225 |
KCV (J/cm2) Minimum | 100 | 150 |
Product Details:
Thickness | 4-5 mm |
Material | Steel |
Standard | DIN, ASTM |
Material Grade | BS 1501: 620B, 621B, 622B |
Product Details:
Steel Grade | SS310 |
Thickness | 0.01~200mm |
Standard | ASTM, JIS |
Surface Treatment | Coated, Hot Rolled |
Type# | UNS# | Chemical Composition(%) | |||||||
C max | Mn | P | S | Si | Cr | Ni | N,Mo | ||
310 | S31000 | 0.25 | 2 | 0.045 | 0.03 | 1.5 | 24-26 | 19-22 | — |
Type# | UNS# | Mechnical Property | ||||||
Tensile Strength | Yield Strength,Bmin | Elongation 2 in,or 50 mm,min,% | Hardness, maxc | |||||
Ksi | MPa | Ksi | MPa | Brinell | Rockwell B | |||
310 | S31000 | 75 | 515 | 30 | 205 | 40 | 217 | 95 |
Product Details:
Condition | New |
Material Grade | 420 |
Shape | Rectangle |
Material | Stainless Steel |