Aluminum Plate

Product Details:

Aluminium alloy 1050 is a popular grade of aluminium for general sheet metal work where moderate strength is required.Aluminium alloy 1050 is known for its excellent corrosion resistance, high ductility and highly reflective finish.

Aluminium Alloy 1050 (1050 A) is available in Plate, Sheet, Strip, Bar, Wire, Drawn Tube, Welding Wire, Forging Stock and Rivet Stock. Aluminium Alloy 1050 (1050A) tube is available in many sizes from stock, however there is a minimum production of 30m. For all stock availability for alloy 1050 (1050A) contact Sales for further availability.

When welding 1050 to itself or an alloy from the same subgroup the recommended filler wire is 1100. For welding to alloys 5083 and 5086 or alloys from the 7XXX series, the recommend wire is 5356. For other alloys use 4043 filler wire.

Chemical Properties Of 1050a aluminum plate:

Mechanical Properties Of 1050a aluminum plate:

Physical Properties Of 1050a aluminum plate:

Additional Information:

• Delivery Time: ready stock
• Packaging Details: as per the customer requirement

Product Details:

5052 is often referred to as “Anodize Quality Aluminum“, as it has excellent finishing qualities and anodized coatings are bright and clear. The major alloying element in 5052 is magnesium in sufficient quantities to cause substantial lowering of the melting point without producing brittleness. When magnesium is used as the major alloying element, or in combination with manganese, the result is a moderate to high strength non-heat treatable aluminum alloy. 5052 is far stronger than the 1100 or 3000 series aluminums, yet forms with reasonable bend radii. Weldability is very good and 5052 has good resistance to corrosion, especially in salt-water / marine atmospheres.

5052 aluminum plate exhibits higher corrosion resistance than other aluminum alloys and higher strength than 3003 aluminum plate. In addition, it exhibits good salt water resistance, making it a popular material for marine applications. 5052 aluminum is easy to form, stamp, weld and finish. It has fair machinability with the proper setup.5052 plate is used for products that require high strength in corrosive environments, including  fuel tanks, truck and trailer side panels, small boat hulls, truck cabs, bumpers, storage tanks and pressure vessels.

5052 aluminum coil and aluminum sheet have good workability, high fatigue strength and good weldability. It has very good corrosion resistance, especially in marine environments.  5052 aluminum can be anodized to improve the corrosion resistance of the material in corrosive environments.

Chemical Properties Of 5052 aluminum plate:

Mechanical Properties Of 5052 aluminum plate:

Product Details:

Alloy 2024 aluminum plates are perhaps the best known and most widely used aircraft alloy. Since it exhibits high yield strength and relatively good fatigue resistance, it is readily used on structures and parts where good strength-to-weight ratio is desired. Because of its good machinability and superior grain structure, Alloy 2024 plate is essential for precision fittings and parts. Though this alloy does not have good corrosion resistance, welding by resistance method is feasible. Typical specifications are ASTM B209, AMS-QQ-A-250/4 and AMS4037.

Alloy 2024 plate products are used in fuselage structurals, wing tension members, shear webs and ribs and structural areas where stiffness, fatigue performance and good strength are required. Sheet products, usually alclad, are used extensively in commercial and military aircraft for fuselage skins, wing skins and engine areas where elevated temperatures to 250°F (121°C) are often encountered.

Chemical Properties Of 2024 aluminum plate:

Mechanical Properties Of 2024 aluminum plate:

Product Details:

Aluminum 2219 has good machinability and good mechanical properties. Aluminum 2219 is an age-hardenable copper containing alloy of aluminum.Aluminum 2219 is typically used in high temperature, structural applications and in high strength elements.

Aluminium Alloy 2219 is a high strength alloy which combines good machinability and good mechanical properties. 2219 is useful over a temperature range of -452°F to 600°F, is readily weldable and has good fracture toughness. In the T8 condition it is resistant to stress corrosion cracking. Aluminium 2219 is typically used in a range of aerospace applications such as high temperature structural applications including space booster and fuel tanks.

Chemical Properties Of 2219 aluminum plate:

Mechanical Properties Of 2219 aluminum plate:

Product Details:

3003-H14 Aluminum plate – (ASTM B209, QQ-A-250/2) Excellent weldability, formability, with good corrosion resistance make 3003 Aluminum plate a popular and economical choice. 3003 Aluminum plate has a smooth, semi-shiny finish and is popular for many applications, including: fuel tanks, food & chemical handling, trailer siding & roofing, etc.

3003 aluminum plate exhibits moderate strength and very good corrosion resistance.  It is used for light support applications. 3003 aluminum is used for stamped parts, as it tends to be gummy when machined, requiring special handling. The material may show slight discoloration when anodized, but it reacts well to mechanical and organic finishings.  It is easily welded and brazed, but soldering is limited to the torch method

3003 aluminum plate is mainly used to manufacture stamped parts that require moderate strength and low weight. These include food and chemical handling equipment, appliance components, truck and trailer roofing, heat exchangers, pipe jacketing, hardware, catwalks, floor panels and lawn furniture components.

3003 aluminum plates react well to mechanical finishing and organic finishes as well. 3003 welding is readily accomplished by means of conventional welding methods but may be gummy if machined. Soldering is limited to the torch method. 3003 plate is mainly used for manufactured stamped parts because of its light weight and moderate strength. TW has a wide range of sizes readily available to the AMS 4008 for H14

Chemical Properties Of 3003 aluminum plate:

Mechanical Properties Of 3003 aluminum plate:

Product Details:

Alloy 5086 aluminum plates have even higher strength than 5052 or 5083 and its mechanical properties vary significantly with hardening and temperature. It is not strengthened by heat treatment; instead, it becomes stronger due to strain hardening or cold working of the material. This alloy can be readily welded, retaining most of its mechanical strength. The good results with welding and good corrosion properties in seawater make Alloy 5086 extremely popular in marine applications. Alloy 5086 has been used in vehicle armor plate due to its high strength factor.

5086 aluminum plate has higher strength than 5052 plate and 5083 plate. Coupled with excellent corrosion resistance,  5086 plate is particularly salt water corrosion resistance. It is also easy to form, stamp and weld.  5086 plate is used for boat hulls, gangways, ramps, superstructures, shipping drums and support structures for marine applications.

Chemical Properties Of 5086 aluminum plate:

Mechanical Properties Of 5086 aluminum plate:

Product Details:

Triton 5454 aluminum alloy has been specifically developed for use in the manufacture of aluminum tank/dry bulk trailers and dump bodies. Our product’s high strength, excellent weldability, formability, and corrosion resistance meets manufacturing and commercial requirements for cargoes from dry bulk to aggressive liquids.

Aluminum alloys contain strong corrosion resistance. These alloys are good low-temperature alloys. Aluminium / Aluminum alloys are sensitive to high temperatures ranging between 200 and 250°C (392 and 482°F). The strength of these alloys increases when exposed to subzero temperatures and the strength decreases when exposed to high temperatures.

Chemical Properties Of 5454 aluminum plate:

Mechanical Properties Of 5454 aluminum plate:

Product Details:

5456 aluminium alloy is an alloy in the wrought aluminium-magnesium family (5000 or 5xxx series). While it is closely related to 5356 aluminium alloy (Aluminum Association designations that only differ in the second digit are variations on the same alloy), it is used in structural applications, like most other aluminium-magnesium alloys, and not as filler for welding. As a wrought alloy, it can be formed by rolling, extrusion, and forging (although forging is not common), but not casting. It can be cold worked to produce tempers with a higher strength but a lower ductility. It is susceptible to exfoliation corrosion when held at temperatures above 65C (150F) for extended periods of time.

Aluminium / Aluminum 5456 alloy has good strength and is useful for structural purposes because of its weldable characteristics. The following datasheet will provide more details about Aluminium / Aluminum 5456 alloy.

Chemical Properties Of 5456 aluminum plate:

Mechanical Properties Of 5456 aluminum plate:

Product Details:

Aluminium 5754 has excellent corrosion resistance especially to seawater and industrially polluted atmospheres.It has higher strength than 5251. This high strength makes Aluminium 5754 highly suited to flooring applications.After rolling, Aluminium 5754 spontaneously softens until it reaches a stable condition.

Aluminium 5754 also corresponds to the following standard designations and specifications:

• A95754
• Al Mg3
• Al 3.1Mg Mn Cr
• AW-5754

Chemical Properties Of 5754 aluminum plate:

Mechanical Properties Of 5754 aluminum plate:

Product Details:

6061 is a good, general purpose aluminum alloy with magnesium and silicon as its alloying elements. 6061 has the highest resistance to corrosion of all the heat treated aluminums, but strength is lower. 6061 has a wide range of mechanical properties and is readily machined and has good forming properties. 6061 welds easily, has excellent joining characteristics, and good acceptance to anodizing and other applied coatings. Electrical conductivity is 40% of copper. 6061 shapes are available from sheet and plate at Triton utilizing our high definition plasma cutter.

6061 is commonly used for structural components, frames, brackets, jigs, fixtures, base plates, machine parts, hydraulic valve bodies, valves parts, fuse parts, gears, worm gears, rectifier parts, fasteners, truck and marine components, marine fittings and hardware, electrical fittings and connectors, hinge pins, magneto parts, appliance fittings, camera lens mounts, etc. 6061 is used for heavy duty structures requiring good strength-to-weight ratio with good corrosion resistance. 6061 is easily cold worked and formed in the annealed condition. Cutting, stamping, bending, deep drawing, drilling, tapping, etc. are all readily accomplished using standard methods.

Chemical Properties Of 6061 t6 aluminum plate:

Mechanical Properties Of 6061 t6 aluminum plate:

Product Details:

Alloy 7050 aluminum plates are the principal choice for aerospace applications, especially in the 3-6 inch thickness range. It exhibits better toughness/corrosion resistance characteristics than the older, more established alloy 7075. Since it is less quench sensitive than most other aerospace alloys, this alloy maintains its strength properties in thicker sections while retaining good stress corrosion cracking resistance and fracture toughness levels. AMS 4050 is commonly associated with 7050, though various manufacturers require their own specifications.

Chemical Properties Of 7050 aluminum plate:

Mechanical Properties Of 7050 aluminum plate:

Product Details:

This aluminum plate is made of one of the strongest of the aluminum alloys. Its use parallels that of 2024, with 7075 selected when higher mechanical properties are desired. 7075 aluminum is an aluminum-zinc alloy with 1%-8% zinc in addition to small amounts of magnesium and small quantities of copper and chromium. This alloy is precipitation hardened to very high strength levels. Alloy 7075 is used in airframe structures and other highly stressed components.

Properties of 7075 / UNS A97075:

• 7075 Aluminum is a very high strength material used for highly stressed structural parts
• The T7351 temper offers improved stress-corrosion cracking resistance
• It has a strength level equal to or exceeding mild steels.
• It has good machinability and excellent finishing characteristics

Chemical Properties Of 7075 aluminum plate:

Mechanical Properties Of 7075 aluminum plate:

Product Details:

7175 aluminium alloy is an alloy in the wrought aluminium-magnesium family (5000 or 5xxx series). While it is closely related to 5356 Aluminium /aluminum alloys are good low-temperature alloys with strong corrosion resistance characteristics and high electrical conductivity. Both aluminium /aluminum and its alloys are in great demand as they are easy to acquire, fabricate and maintain.The following datasheet provides an overview of aluminium / aluminum 7175 alloy.

Chemical Properties Of 7175 aluminum plate:

Product Details:

Alloy 7475 aluminum plates are a controlled toughness alloy whose values are 40 percent greater than alloy 7075 in the same tempers. This alloy’s corrosion resistance and fatigue behavior are also equal to, or better than, many of the other high strength aerospace alloys, and is for those applications that require a combination of high strength, superior fracture toughness and resistance to fatigue crack propagation.

Chemical Properties Of 7475 aluminum plate:

Mechanical Properties Of 7475 aluminum plate:

Product Details:

Aluminum plate Stock:

• 1050A Aluminium Plate
• 1350 Aluminium Plate
• 2024 Aluminium Plate
• 2124 Aluminium Plate
• 2219 Aluminium Plate
• 3003 Aluminium Plate
• 5052 Aluminium Plate
• 5083 Aluminium Plate
• 5086 Aluminium Plate
• 5154 Aluminium Plate
• 5454 Aluminium Plate
• 5456 Aluminium Plate
• 5754 Aluminium Plate
• 6061 T6 Aluminium Plate
• 7050 Aluminium Plate
• 7075 Aluminium Plate
• 7175 Aluminium Plate
• 7475 Aluminium Plate

Typical Application of 1350 aluminum plate:

• Lighting,
• Solar reflective film,
• Building appearance,
• Interior decorating:Ceilings,walls, furniture,cabinets,elevators, signs
• Frame;household appliances:refrigerators,microwave ovens,audio equipment,etc.
• Aerospace and military aspects

Chemical Properties Of 1350 aluminum plate:

Mechanical Properties Of 1350 aluminum plate:

Physical Properties Of 1350 aluminum plate:

Product Details:

Alloy 2124 aluminum plates are a high purity form of 2024 and is normally supplied in 1.50″ – 6.00″ plate. Available in T851 temper, this plate alloy exhibits good strength retention and creep resistance at elevated temperatures up to 350 degrees. Fracture toughness levels of 2124-T851 plate are significantly higher than 2024-T851. This alloy is recommended for those applications requiring better short-transverse ductility, high strength and good machinability and has excellent exfoliation corrosion resistance. Fatigue properties of alloy 2124-T851 are similar to those of 2024-T851.

Chemical Properties Of 2124 aluminum plate:

Mechanical Properties Of 2124 aluminum plate:

Product Details:

Alloy 5154 aluminum plate in all alloys in heat treatable alloys mill finish. 5154 aluminum sheet in non heat treatable alloys, mill finish, one side bright mill finish, standard one size bright finish, and standard two sides bright finish.Aluminium /aluminum alloys have strong corrosion resistance. These alloys are sensitive to high temperatures ranging between 200 and 250°C (392 and 482°F), and tend to lose some of their strength. However, the strength of the aluminium / aluminum alloys can be enhanced at subzero temperatures, making them ideal low-temperature alloys.

The aluminium / aluminum 5154 alloy is a wrought alloy. The following datasheet will provide more details about the aluminium / aluminum 5154 alloy.The aluminium / aluminum 5154 alloy is widely used in the manufacture of welded structures, storage tanks, and pressure vessels. It is also used in salt water service.

Chemical Properties Of 5154 aluminum plate:

Mechanical Properties Of 5154 aluminum plate:

Physical Properties Of 5154 aluminum plate:

Product Details:

Alloy 5083 aluminum plates have higher strength than 5052 plate and has exceptional thermal conductivity. In the tempered condition, it retains good formability due to excellent ductility. It is highly suitable for welding and can be hardened by cold work. Because Alloy 5083 exhibits excellent resistance to general corrosion, it is used in marine applications. Since Alloy 5083 is capable of withstanding extremely low temperatures without brittleness or loss of properties, it is especially suited to the cryogenic market.

Aluminium 5083 is known for exceptional performance in extreme environments. 5083 is highly resistant to attack by both seawater and industrial chemical environments. Alloy 5083 also retains exceptional strength after welding. It has the highest strength of the non-heat treatable alloys but is not recommended for use in temperatures in excess of 65°C.

At Triton we offer 5083 aluminum plates to satisfy the requirements for many industries. 5083 aluminum plate has higher strength than 5052 plate and a high resistance to corrosion.  It is especially suited to cryogenic applications as it is able to withstand extremely low temperatures without brittleness or losing its other properties.  5083 aluminum is easy to form, stamp, weld and finish.

Due to its strength and temperature characteristics, 5083 plate is used in pressure vessels, truck, marine, underwater vehicles and cryogenic equipment.

Chemical Properties Of 5083 aluminum plate:

Mechanical Properties Of 5083 aluminum plate: