High Strength Steel Plate

Product Details:

A871 steel plate is used for tubular structures and poles, .A871 Grade 65 may be provided as-rolled, normalized or quenched and tempered.

A871-65 is a high-strength low-alloy structural steel plate. ASTM871-65 has atmospheric corrosion resistance so it can be used bare or unpainted for many applications. Two grades, 60 and 65, may be provided as-rolled, normalized or quenched and tempered as required to meet the specified mechanical requirements.The atmospheric corrosion resistance of this ASTM871 in most environments is substantially better than that of carbon structural steels.

When usually exposed to the atmosphere, ASTM A871 GRADE 65 TypeⅡ is suitable for many applications in the bare condition. ASTM A871 GRADE 65 TypeⅡ could be produced in 300mm.

High Strength Low Alloy (HSLA) Steel Plate:

Chemical Properties Of a871 grade 65 plate:

Mechanical Properties Of a871 grade 65 plate:

Product Details:

The American Association of State Highway and Transportation Officials (AASHTO), has its own set of specifications for plate steel used in bridges. Although the M270 steel plate is essentially the same as the ASTM 709, there are times when the AASHTO specifications are required for the job, and triton is able to access the grades you need, when you need theme

High Strength Low Alloy or (HSLA) steel plate, is stronger and tougher than carbon steel, and is ductile, highly formable and weldable. The HSLA specification is intended primarily for use in structural members, where savings in weight and added durability are critical.

Aashto m270 Plate Properties:

Product Details:

The process to create Hot Rolled Steel creates a more ductile steel with a rough surface finish and is sometimes more difficult to machine. The cost is usually much less than a similar Cold Rolled Steel product. Order A36 Hot Rolled Steel Plates in A36 Hot Rolled Steel Alloys and Hot Rolled Stainless Steel in small quantities and no minimums of all Hot Rolled Steel at The triton.

Hot rolling is a mill process which involves rolling the steel at a high temperature (typically at a temperature over 1700° F), which is above the steel’s recrystallization temperature. When steel is above the recrystallization temperature, it can be shaped and formed easily, and the steel can be made in much larger sizes. Hot rolled steel is typically cheaper than cold rolled steel due to the fact that it is often manufactured without any delays in the process, and therefore the reheating of the steel is not required (as it is with cold rolled). When the steel cools off it will shrink slightly thus giving less control on the size and shape of the finished product when compared to cold rolled.

Hot rolling is a mill process which involves rolling the steel at a high temperature (typically at a temperature over 1700° F), which is above the steel’s recrystallization temperature. When steel is above the recrystallization temperature, it can be shaped and formed easily, and the steel can be made in much larger sizes. Hot rolled steel is typically cheaper than cold rolled steel due to the fact that it is often manufactured without any delays in the process, and therefore the reheating of the steel is not required (as it is with cold rolled). When the steel cools off it will shrink slightly thus giving less control on the size and shape of the finished product when compared to cold rolled.

Additional Information:

• Item Code: HRSP
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Nhav Sheva
• Production Capacity: 3000-5000 Tons
• Delivery Time: Ready Stock

Product Details:

Triton Steel stocks a generous supply of Canadian steel plate in grade G40.21 44W. 44W is sometimes referred to with its metric designations of 300W. When referenced with a “T”, such as 300WT, this indicates that charpy tests are required. When Charpy tests are required, the category will be indicated. Value of categories are described below in mechanical properties.CSA G40.21 covers the chemical and mechanical requirements for structural quality steel shapes, plates, and bars for use in general construction and engineering purposes.

The most common merchant structural grade of CSA G40.21 is 44W(300W). Most steel mills in the US manufacture their merchant bars (rounds, flats) to meet both this grade and ASTM A36 in order to satisfy users on both sides of the border. Becoming more common in recent years is structural steel per 50W. ASTM A572/A529 grade 50 will typically satisfy these requirements.

Types:

Grades, Types and Strength Levels:

Product Details:

A709 is the specification used for steel plate used in the manufacture of bridges. Triton stocks A709 Grade 36, A709 Grade 50 and A709 Grade 50W. These grades are often specified with charpy tests referencing the specific zone (or climatic region) in which the bridge will be in use. The charpys are specified as non-fracture critical which is a per heat test (frequency "H"), or fracture critical which is a per plate test (Frequency "P"). Bridge steels can also be ordered to the ASSHTO M270 Spec referenced as AASHTO M270 Grade 36, AASHTO M270 Grade 50, AASHTO M270 Grade 50W.

A709 grade 50 plate Grade and Specification

Chemical Properties Of a709 grade 50 plate

Physical Properties Of a709 grade 50 plate

Additional Information:

• Item Code: A709
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Nhava Sheva
• Production Capacity: 400-600 Tons
• Delivery Time: 4- 8 Weeks

Product Details:

A high strength structural steel supplied in quenched and tempered condition. The steel is designed to provide excellent welding and bending properties and it offers substantial possibilities for savings in material costs, processing and handing. Due to its high strength, it enables design of lighter, more durable and efficient products and structures.

Specification:

Chemical Composition:

Additional Information:

• Item Code: Sailma
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Nhava Sheva
• Production Capacity: 3000-5000 Tons
• Delivery Time: Ready Stock

Product Details:

HSLA steels were originally developed in the 1960s for large-diameter oil and gas pipelines. The line pipe used in these projects required higher strength and toughness than mild carbon steel, and good weldability provided by a low carbon equivalent.The oil & gas sector is still market where the most important applications for HSLA steels are found, but the automotive and the offshore & onshore structural engineering sectors now consume significant quantities of these alloys

Triton range of HSLA steels (high strength yield low alloy) are engineered to promote excellent high yield characteristics which in turn provide an extremely cost effective option for buyers. In many cases, the use of hsla steel will reduce the volume of material required in a project without compromising the quality and safety of the installation because it allows the customer to reduce the material thickness.

450 yield steel plate Stock:

• 450 Yield Plate
• A36 Plate
• A516 Plate
• A572 Plate
• A573 Plate
• A588 Plate
• A606 Plate
• A709 Grade 50 Plate
• A871 Grade 65 Plate
• AASHTO M270 Plate
• CSA G40.21 Plate
• Hot Rolled Steel Plate
• PVQ A283 Plate
• PVQ A285 Plate
• SAILMA Grade 350 HI Plate
• SAILMA Grade 450 HI Plate

450 yield steel plate Processing:

• The majority of normal processing can be performed on 450 yield steel plate

Triton Alloys Inc. Offers Following Processing for 450 yield steel plate:

• Cutting
• Forming Drilling/ Machining
• Grinding
• Testing

Typical Application of 450 yield steel plate:

• Wearing plates
• Stone or iron chutes
• Truck frames,
• Brackets
• Crane booms
• Rail cars
• Anti drill plates such as security doors, shot blasting equipment and tumbling machine

450 yield steel plate Packing & Shipping:

• Each order is packaged according to the customer' s standards including preparation for export such as wooden case, pallet or according to customer's requirement All shipping documentation is provided for 450 yield steel plate delivery from mill to customer.
• Every assignment begins with a visit of our experienced sales representative who assesses the volume / weight of the belongings and brief the client about the nature of packing required as well as various documentation formalities when moving from India.

Additional Information:

• Item Code: 450
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Nhava Sheva
• Production Capacity: 200 - 400 Tons
• Delivery Time: Ready Stock

Product Details:

This specification covers structural quality carbon-manganese-silicon steel plates in three tensile strength ranges intended primarily for service at atmospheric temperatures where improved notch toughness is important. If the steel is to be welded, a welding procedure suitable for the grade of steel and intended use or service shall be utilized. The steel shall be made by fine grain practice. Heat and product analysis shall conform to the chemical composition requirements prescribed for carbon, manganese, phosphorus, sulfur, and silicon. The tension test specimen shall conform to the tensile requirements including tensile strength, yield point, and elongation.

A573 steel plate is a structural quality steel plate that is used in the manufacture of storage tanks. A573 is fully killed, made to fine-grain practice and is used where atmospheric conditions require improved notch toughness.

A573 Gr. 70 steel grade is max yield and tensile in A573 improved toughness carbon steel plate.A573 Gr.70 usual max thickness is 40mm, in order to satisfy our customers requirement, triton also could research and development more thick steel plates

Chemical Properties Of a573 Grade 70 plate

Mechanical Properties Of a573 Grade 70 plate

Additional Information:

• Item Code: Boiler
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Nhava Sheva
• Production Capacity: 500 Tons
• Delivery Time: Ready Stock

Product Details:

Steel Plate, also known as Hot Rolled A36 Steel Plate is a structural quality steel plate used for a large variety of general construction and industrial applications.
ASTM A36 plate is a low carbon steel that exhibits good strength coupled with formability. It is easy to machine and fabricate and can be securely welded. The steel can be galvanized to provide increased corrosion resistance.

A36 is one of the most widely used grades of steel plate.It is used in practically every industry and its applications are too numerous to mention. Triton stocks a wide range of sizes in all of our warehouses.A36 plate can be used for a wide range of applications, depending on the thickness and corrosion resistance of the alloy.

Some of the products manufactured using A36 structural steel plate are:
Buildings, including pre-fabricated buildings, warehouses, industrial and commercial structures
Cabinets, enclosures and housings
Pipe and tubing

Chemical Properties Of a36 plate:

Mechanical Properties Of a36 plate:

A36 plate Stock:

• 450 Yield Plate
• A36 Plate
• A516 Plate
• A572 Plate
• A573 Plate
• A588 Plate
• A606 Plate
• A709 Grade 50 Plate
• A871 Grade 65 Plate
• AASHTO M270 Plate
• CSA G40.21 Plate
• Hot Rolled Steel Plate
• PVQ A283 Plate
• PVQ A285 Plate
• SAILMA Grade 350 HI Plate
• SAILMA Grade 450 HI Plate

Additional Information:

• Item Code: CarbonPlate
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Nhava Sheva
• Production Capacity: 1000 - 1500 Tons
• Delivery Time: Ready Stock

Product Details:

ASTM A606 plate, a High Strength Low Alloy (HSLA) steel plate, is 20-30% lighter than carbon steel and exhibits up to four times the atmospheric corrosion resistance of common structural carbon steel. When it is exposed to external conditions, the steel plate develops a weathered orange-brown oxide that is resistant to corrosion, increasing its life and durability. It is weldable, formable, punchable, and machinable using the proper techniques.

Corten is a trade name associated with A606. This group of alloys under the name of Corten is also known as weathering steel due to its rust-like appearance when expoosed to weathering over time.A606 plate is used for bridges, telecommunications and transmission towers, freight cars and housings that require durability and a high strength-to-weight ratio.

A606 is a high-strength low-alloy steel plate used in structural applications such as bridges and buildings. Its advantage over A572 50 is its "weathering" ability, which provides atmospheric corrosion resistance and ultimately longer life in applications where exposure to elements will be a factor. We generally stock this material as A588 Gr A & B in plate and 606 in sheet.

Chemical Properties Of a606 plate:

Mechanical Properties Of a606 plate:

Additional Information:

• Item Code: Plate
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Nhava Sheva
• Production Capacity: 200-500 Tons
• Delivery Time: 4 - 6 Weeks

Product Details:

A283 Gr C and A285 Gr C are grades of steel plate used to manufacture storage tanks and low pressure, temperature controlled vessels.A283 plate steel features low and intermediate tensile strength carbon steel plate of structural quality.

This specification covers four grades of carbon steel plates of structural quality for general application. Steel samples shall be melt processed by either open-hearth, basic-oxygen, or electric furnace. Heat and product analysis shall be performed wherein steel materials shall conform to required chemical compositions of carbon, manganese, phosphorus, sulfur, silicon, and copper. Steel specimens shall also undergo tensile tests and shall conform to required values of tensile strength, yield point, and elongation.

Common carbon structural steel plate A283 Grade C and A283 Grade D are mainly used in heavy industry and oil plants for built steel tanks and vessels.It is good in welding and economic for useage.The best equavilent steel grades are SA283 Grade C and SA283 Grade D in steel standard specification ASME SA 283/SA 283M.

Chemical Properties Of pvq a283 plate

Mechanical Properties Of pvq a283 plate

Additional Information:

• Item Code: 283
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Nhava Sheva
• Production Capacity: 500-1000 Tons
• Delivery Time: Ready Stock

Product Details:

A283 Gr C and A285 Gr C are grades of steel plate used to manufacture storage tanks and low pressure, temperature controlled vessels.A285 steel plates are intended for fusion-welded pressure vessels. Plates are normally supplied in the as-rolled condition

ASTM A285 Grade C is a low to intermediate yield steel used in the fabrication of carbon steel pressure vessels and boilers.
The steel is intended for use in standard tanks and boilers rather than high pressurised vessels due to the steels lower yield strength. ASTM A285 Grade C is supplied throughout the oil gas and petrochemical industry, and Triton hold this material in stock.

This specification covers low and intermediate tensile strength carbon steel plates produced as killed, semi-killed, capped, or rimmed steel. These plates are intended for fusion-welded pressure vessels. The maximum plate thickness under ASTM A285, for reasons of internal soundness, is 2 in. [50 mm] for all grades.

Chemical Properties Of pvq a285 plate

Additional Information:

• Item Code: 285
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Nhava Sheva
• Production Capacity: 500-1000 Tons
• Delivery Time: Ready Stock

Product Details:

We offer a wide range of Sailma Plate that is procured from well known vendors of the world. These conform to the international quality standards and are known for enhanced durability and resistance to corrosion. Available in various grades, our range can also be customized as per the specifications of our clients.

High Tensile Steel Plate of Following Grades are available with us 300, 300HI, 350, 350HI, 410, 410HI, 450, 450HI ,S275J2G3, S355J2G3, S355J2GIW, S355JR, DILLIMAX 690, NAXTRA 70.

SAILMA 350 high tensile structural steel plates normally supplied in tempered and Quenched condition.Due to its high strength, it enables design of lighter, more durable and efficient products and structures. This steel is designed to provide superior welding and bending properties and it offers substantial possibilities for savings in material costs, processing and handling.

Chemical Properties Of sailma 350 hi plate:

Additional Information:

• Item Code: Sailma-1
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Nhava Sheva
• Production Capacity: 2000 - 3000 Tons
• Delivery Time: Ready Stock

Product Details:

We offer a wide range of Sailma Plate that is procured from well known vendors of the world. These conform to the international quality standards and are known for enhanced durability and resistance to corrosion. Available in various grades, our range can also be customized as per the specifications of our clients.

High Tensile Steel Plate of Following Grades are available with us 300, 300HI, 350, 350HI, 410, 410HI, 450, 450HI ,S275J2G3, S355J2G3, S355J2GIW, S355JR, DILLIMAX 690, NAXTRA 70.

SAILMA 450 high tensile structural steel plates normally supplied in tempered and Quenched condition.Due to its high strength, it enables design of lighter, more durable and efficient products and structures. This steel is designed to provide superior welding and bending properties and it offers substantial possibilities for savings in material costs, processing and handling.

High Tensile Steel Plates:

Chemical Properties Of sailma 450 hi plate:

Additional Information:

• Item Code: Sailma-12
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Nhava Sheva
• Production Capacity: 200-400 Tons
• Delivery Time: Ready stock